SECTION 5 – GENERAL SPECIFICATIONS AND MAINTENANCE
– JLG Lift –
5-39
Swing Bearing Race
Lube Points - 2 grease fittings
Capacity: A/R
Lube - A (See Table 5-7)
Interval - Every 250 hours of operation
1.
Remove chassis hoods.
2.
From ground control station, raise the mast to gain
access to the turntable plate.
3.
Locate the
access hole (1)
on the turntable plate.
4.
Swing the structure to the right to gain access to the
first
grease fitting (2)
.
5.
Lubricate using a grease gun.
6.
Swing the structure 180° to the left to gain access to
the second grease fitting and lubricate.
Figure 5-23. Swing Bearing Race Lubrication
To
order
go
to
Discount-Equipment.com
