SECTION 1 – SAFETY PRECAUTIONS
– JLG Lift –
1-11
1.4
TOWING, LIFTING, AND HAULING
• Never allow personnel in platform while towing, lifting,
or hauling.
• This machine should not be towed, except in the event
of emergency, malfunction, power failure, or loading/
unloading. Refer to Emergency Towing Procedures.
• Ensure extending structure is fully retracted and that
the platform and the tool tray are completely empty of
tools prior to towing, lifting or hauling.
• Refer to Section 3 for lifting information.
1.5
MAINTENANCE
This sub-section contains general safety precautions which must
be observed during maintenance of this machine. Additional pre
-
cautions to be observed during machine maintenance are
inserted at the appropriate points in this manual and in the Ser
-
vice and Maintenance Manual. It is of utmost importance that
maintenance personnel pay strict attention to these precautions
to avoid possible injury to personnel or damage to the machine
or property. A maintenance program must be established by a
qualified person and must be followed to ensure that the
machine is safe.
Maintenance Hazards
• Shut off power to all controls and ensure that all moving
parts are secured from inadvertent motion prior to per
-
forming any adjustments or repairs.
• Never work under an elevated platform until it has been
fully lowered to the full down position, if possible, or
otherwise supported and restrained from movement
with appropriate safety props, blocking, or overhead
supports.
• DO NOT attempt to repair or tighten any hydraulic hoses
or fittings while the machine is powered on or when the
hydraulic system is under pressure.
• Always relieve hydraulic
pressure from all hydrau
-
lic circuits before loosen
-
ing
or
removing
hydraulic components.
• DO NOT use your hand to
check for leaks. Use a
piece of cardboard or
paper to search for leaks.
To
order
go
to
Discount-Equipment.com
