SECTION 1 – SAFETY PRECAUTIONS
1-10
– JLG Lift–
Crushing and Collision Hazards
• Approved head gear must be worn by all operating and
ground personnel.
• Check work area for clearances overhead, on sides, and
bottom of platform when lifting, swinging or lowering
platform, and driving.
• During operation, keep all body parts inside platform
railing.
• Always post a lookout when driving in areas where
vision is obstructed.
• Keep non-operating personnel at least 2m (6 ft.) away
from machine during all operations.
• Limit travel speed according to conditions of ground
surface, congestion, visibility, slope, location of person
-
nel, and other factors which may cause hazard of colli
-
sion or injury to personnel.
• Be aware of stopping distances in all drive speeds. When
driving in high speed, slow down the machine using the
controller before stopping.
• Do not use high speed drive in restricted or close quar
-
ters or when driving in reverse.
• Exercise extreme caution at all times to prevent obsta
-
cles from striking or interfering with operating controls
and persons in the platform.
• Ensure that operators of other overhead and floor level
machines are aware of the aerial work platform’s pres
-
ence. Disconnect power to overhead cranes. Barricade
floor area if necessary.
• Do not operate over ground personnel. Warn personnel
not to work, stand, or walk under a raised platform. Posi
-
tion barricades on floor as necessary.
To
order
go
to
Discount-Equipment.com
