SECTION 1 – SAFETY PRECAUTIONS
1-2
– JLG Lift–
• An operator must not accept operating responsibilities
until adequate training has been given by competent
and authorized persons.
• Allow only those authorized and qualified personnel to
operate the machine who have demonstrated that they
understand the safe and proper operation and mainte
-
nance of the unit.
• Read, understand, and obey all DANGERS, WARNINGS,
CAUTIONS, and operating instructions on the machine
and in this manual.
• Ensure that the machine is to be used in a manner
which is within the scope of its intended application as
determined by JLG.
• All operating personnel must be familiar with the emer
-
gency controls and emergency operation of the
machine as specified in this manual.
• Read, understand, and obey all applicable employer,
local, and governmental regulations as they pertain to
your utilization and application of the machine.
Workplace Inspection
• Precautions to avoid all hazards in the work area must
be taken by the user before and during operation of the
machine.
• Do not operate or raise the platform from a position on
trucks, trailers, railway cars, floating vessels, scaffolds or
other equipment unless the application is approved in
writing by JLG.
• Before operation, check work area for overhead hazards
such as electric lines, bridge cranes, and other potential
overhead obstructions.
• Check floor surfaces for holes, bumps, drop-offs,
obstructions, debris, concealed holes, and other poten
-
tial hazards.
• Check the work area for hazardous locations. Do not
operate the machine in hazardous environments unless
approved for that purpose by JLG.
• Be sure that the ground conditions are able to support
the maximum load shown on the decals located on the
machine.
• This machine can be operated in nominal ambient tem
-
peratures of -20° C to 40° C (0° F to 104° F). Consult JLG
To
order
go
to
Discount-Equipment.com
