SECTION 5 – GENERAL SPECIFICATIONS AND MAINTENANCE
5-18
– JLG Lift–
5.6
OIL LEVEL/OIL FILTER - 8E/20E
NOTE:
Care should be taken not to introduce any impurities (dirt, water etc.) while
cap or plug is removed.
Hydraulic Oil Check
Lube Point - Hydraulic Tank
Reservoir Capacity: 6 liters
Lube - Hydraulic Oil (See Table 5-8)
Interval - Check Daily
NOTE:
Check oil level with the wheels fully steered to the left.
1.
Locate the
decal (1)
on the
tank (2)
through the left
mast hood (a hole is intended to this purpose).
2.
The oil level in the tank must be within the MIN (mini
-
mum) and Max (maximum)
markings (3)
of the decal.
3.
If additional oil is required :
- remove the left mast hood.
- wipe all dirt and debris from the
filler/breather cap
(4)
area, add proper grade of oil by using a funnel. Fill
until oil level is between the MIN and MAX
markings
(3)
.
Figure 5-7. Hydraulic Oil Check - 8E/20E
To
order
go
to
Discount-Equipment.com
