SECTION 1 – SAFETY PRECAUTIONS
– JLG Lift –
1-7
DO NOT MANEUVER MACHINE OR PERSONNEL INSIDE PROHIBITED
ZONE (MAD). ASSUME ALL ELECTRICAL PARTS AND WIRING ARE
ENERGIZED UNLESS KNOWN OTHERWISE.
Tipping Hazards
• Ensure that the ground conditions are adequate to sup
-
port the maximum tire load indicated on the tire load
decal located on the chassis. Do not travel on unsup
-
ported surfaces.
• The user must be familiar with the driving surface
before driving. Do not exceed the allowable sideslope
and grade while driving.
• Do not elevate platform or drive with platform elevated
while on or near a sloping, uneven, or soft surface.
Ensure machine is positioned on a firm, level and
smooth surface before elevating platform or driving
with the platform in the elevated position.
• Never exceed the maximum work load as specified on
the platform. Keep all loads within the confines of the
platform, unless authorized by JLG.
• Keep the chassis of the machine a minimum of 0.6 m (2
ft.) from holes, bumps, drop-offs, obstructions, debris,
concealed holes, and other potential hazards at the
ground level.
• Do not operate the machine when wind conditions
exceed the maximum operating wind speed as speci
-
fied on the platform.
To
order
go
to
Discount-Equipment.com
