Oriental motor EZ limo ESMC-A2, Руководство по эксплуатации

Страница: 59 / 94

7 Teaching pendant operation
− 58 −
7.6 I/O checking
The I/O check function is used to check input signals from the sensors and host controller or output signals to
the host controller for testing purposes.
Perform I/O check to examine the wiring condition after the equipment has been started or during inspection.
Note
All I/O functions and operations are disabled during the I/O check. Nothing occurs even
after turning ON any I/O signal.
1.
On the first screen of the TST mode, press the
[F2] key to select I/O check.
2.
Press one of [F2] to [F4] keys.
Use the [
↑
] [
↓
] keys to move through the items on
the applicable check screen selected by pressing one
of
[F2] to [F4] keys.
•
Input signals
Input signals can be monitored.
ON: “
∗ ”
OFF: “ • ”
•
Output signals
Switch the ON/OFF status of each output signal by pressing
the
[F4] key.
ON: “ ∗ ”
OFF: “ • ”
• A-phase pulse output (ASG), B-phase pulse
output (BSG)
1000 pulses (1000 Hz) are output every time the [F4] key is
pressed.
Pulse is output: “
∗
”
Pulse is stopped: “
•
”
6 5 6 + 1
5 G N G E V
( ( (
/ Q F G + P 1 W V ' P E
6 5 6 + 1 + P + P
5 6 # 4 6 ࡮ # % . % - ࡮
( 4 ' ' ࡮ 5 6 1 2 ࡮
/ Q F G
6 5 6 + 1 ' P E
# 5 ) $ 5 ) ࡮
( 1 0
/ Q F G 2 W U J
6 5 6 + 1 1 W V 1 W V
# . / ࡮
( 1 0 1 ( (
/ Q F G 2 W U J
•
Input signals
First screen of the TST mode
•
Output signals
•
A-phase pulse output (ASG),
B-phase pulse output (BSG)