Opel 1900 1973, Руководство по обслуживанию

Страница: 512 / 625

HEATER SYSTEM. GT
3
Figure Heater Assembly-Rear View
The heater-defroster air door directs the air to the
floor outlets, defroster outlets, or apportions the air
flow to both outlets depending on the position of the
door. A manual water valve regulates the flow of
coolant through the heater core, thereby varying the
temperature of the air flow past the core. The blower
motor is located in the forward portion of the heater
housing. See Figure
Opening and closing of the heater defroster air door
and manual water valve is accomplished by
cables connected to the heater control. The heater
controls function as follows:
Air Inlet-Defroster Control (Upper Lever) This
control (See Figure opens and closes the air
inlet and heater-defroster air door which channels
the air flow to either the heater outlets or to defroster
outlets, or to both outlets simultaneously, depending
on the position of the control.
Temperature Control (Lower Lever) This lever
regulates the flow of coolant through the heater core
and the amount of air that can by-pass heater core
thereby increasing or decreasing the air temperature
proportionate to its travel (toward red square-warm;
toward blue square-cold). Unheated air may be cir-
culated through the car by leaving the temperature
control in the OFF position (blue square).
Figure Heater Assembly-Front View