Omron F3SG-RA, Руководство пользователя

Страница: 123 / 268

99
F3SG-R
User’s Manual
Chapter
2
La
mp
System Operation and Functions
E
The user can make changes to the settings by the Configuration Tool.
*1. Setting parameters of this function can be saved according to the states where the Muting function
is enabled and disabled, respectively. After changing the Muting function from Enable to Disable or
from Disable to Enable, also check the settings of this function again.
Refer to

Considerations for enabling and disabling Muting function under 2-1. Combination of
Functions for more information.
Refer to 2-12. Muting for more information on settings of the Muting function.
*2. Refer to the table of Information (Output operation mode) assigned to Lamp below.
*3. The Lamp illuminates according to the patterns as shown in the output pattern chart below.
 Output pattern chart

Information (Output operation mode) assigned to Lamp
Lamp output Function
Factory Default Setting
Available Parameters Muting function *1
Enabled Disabled
Red
(Priority 1) Output operation mode Safety output information Safety output information *2
Inverted signal output Enable Enable Enable/Disable
Output pattern Solid-ON Solid-ON Solid-ON/ON 1 time/ON 2
times/ON 3 times *3
Orange
(Priority 2) Output operation mode Stable-state information Stable-state information *2
Inverted signal output Enable Enable Enable/Disable
Output pattern ON 1 time ON 1 time Solid-ON/ON 1 time/ON 2
times/ON 3 times *3
Green
(Priority 3) Output operation mode Safety output information Safety output information *2
Inverted signal output Disable Disable Enable/Disable
Output pattern Solid-ON Solid-ON Solid-ON/ON 1 time/ON 2
times/ON 3 times *3
Information Name
Description
(Auxiliary output is turned ON under the following condition)
Safety output information When Safety output is in the ON state
Interlock information Under Interlock state
Lockout information Under error/ Lockout state
Excess power-on time
information When power-on time exceeds power-on time threshold
Excess load switching
frequency information When load switching frequency exceeds load switching frequency threshold
Stable-state information When the F3SG-R is unblocked with stable light intensity
Muting information Under Muting state
Override information Under Override state
Muting/Override information Under either Muting or Override state
Solid-ON
ON 3 times
ON 2 times
ON 1 time
1 s