Omron F3SG-RA, Руководство пользователя

Страница: 195 / 268

171
F3SG-R
User’s Manual
Chapter
4
Wiring
Wiring/Installation
E
4-5-3-4. Extending Cable Length with Commercially Available Cable
When you need to use a cable that is not specified by OMRON, use a cable that satisfies the following
specifications.
1. Emitter: 5-wire Receiver: 8-wire
2. 0.3 mm
2 or larger, conductor resistance 0.058 ohms/m max.
3. Mute A and Mute B lines, and 24 VDC and 0 VDC lines must be used as twisted-pair lines.
Do not use cables in the same conduit as high voltage or electric power lines.
4-5-3-5. Adapter Cable (A)
This Adapter Cable converts the wiring for MS4800 Series Safety Light Curtain to that for F3SG-RA
Series.
<Wiring conversion>
Note that the Adaptor Cable restricts the following functions related to wiring.
For more information on setting the functions by the DIP Switch, refer to Chapter 3 Setting with DIP Switch . For more
information on setting the functions by the Configuration Tool, refer to Safety Light Curtain Configuration tool for Model
F3SG (SD Manager 2) User’s Manual.
Adapter Cable Model Converted from Converted to
F39-JGR3M-A55-L MS4800 series emitter F3SG-RA series emitter
F39-JGR3M-A88-D MS4800 series receiver F3SG-RA series receiver
Wiring
F3SG functions Restrictions by using Adapter Cable
Signal name MS4800 F3SG
OSSD 1, 2 X X Safety Output Available.
Start or EDM
(Mode Select)
(RESET)
X
X
Interlock, Lockout Rest,
Override Not available. The Interlock function of the F3SG-RA
must be set to the Auto Reset mode.
EDM
X
External Device
Monitoring Not available. The EDM function of the F3SG-RA
must be disabled.
Auxiliary output
X X
Auxiliary Output Available. To use this function, the Output Operation
Mode must be changed by the Configuration Tool.
Muting input X Muting, Pre-Reset, etc. Not available.
Test input X X External Test Not available.