Omron EQ100-E, Руководство пользователя

Страница: 100 / 256

7. EQ100 Settings
7-11
Item Description
Device Name Enter a name of the measurement device. If not entered, "model"+"#"+"IP
address" is automatically set.
<Input range> Half-width63 characters (Full-width 20 characters, more or
less)
Device Type A list of measurement device types appears. Select a measurement device
type to add.
Setting Items Details depend on a selected measurement device type.
[Host Device]: Select [LAN].
[IP Address]: Enter an IP address of the measurement device.
[Connection count]: For only collecting devices such as Power Sensor
Station and Air Flow Station, enter the number of connections of the
downstream measurement devices.
<Input range> 1 to 31 devices
[Measurement Cycle]: Select a collecting interval for the measurement
device.
<Selection> 1min/5min/10min/30min/60min
[Port No.]: Enter a port number to use.
[Timeout]: Select a time period to evaluate no communication response
from the measurement device.
<Selection> 1s/2s/5s/10s/20s/30s
Default
Channel
Registration
This function saves operations to channel registration and group
registration described later. If the [Default Channel Registration] check box
is selected, channel registration and group registration can be done at the
same time by measurement device registration.
<Default Channel Registration>
Major channels of the measurement device are automatically registered.
Channels that are automatically registered are defined upon factory
shipment. Note that default registration is not available for PLC. Channel
registration is required later.
Note that the channels that are registered simultaneously can be changed
later.
<Destination Group to Add>
If the [Destination Group to Add] check box is selected, measurement
device channels can be registered to a specified group at the same time.
To use this function, first register a group.
For registration, see "7.4.7. Group Registration".
Note that performing the default registration without performing group
registration registers to a default "group".
Batch
Registration
Use this function to register multiple measurement devices of the same type
together. For how to register, see "
■
Batch Registration”.