Omron EQ100-E, Руководство пользователя

Страница: 35 / 256

2. Specifications
2-4
Button 2.1.3.
Indication Execution
Condition
Application
Response
Accept Result Others
RUN/
STOP
Pressing the
button
(1 second or
longer)
- Under setup status
Press to proceed to the collecting
status.
- Under collecting status
Press to proceed to the setup
status.
* If the setup DIP switch SW9=ON,
the RUN/STOP button is disabled.
Yes Yes N/A
RESET
Pressing the
button
(1 second or
longer)
Press to restart EQ100.
This is same as turning the power off
and on again.
Yes Yes N/A
SD SAVE
Pressing the
button
(1 second or
longer,
less than 5
seconds)
Press the button to save the
collected data file in the EQ100
internal memory to an SD card.
Files that are not yet saved are
outputted.
At the same time the data not saved
in the internal memory are saved into
the internal memory.
Yes Yes N/A
Pressing and
holding the
button
(5 second or
longer)
Press the button before ejecting the
SD card from EQ100.
When this operation is done, the
function by pressing the button does
not work. If you wish to save data to
the SD card and eject the card, press
the button (1 second or longer, less
than 5 seconds) before performing
this operation.
Yes Yes
SD card
access
indicator
turns off
TEST Not used
* Accept: Buzzer sound (for 0.2 sec)
Result: Buzzer sound (for normal end for 4 sec, for abnormal end four times in 0.5 sec
interval)