7. EQ100 Settings
7-74
Writing EQ Project by Web UI Function
7.9.4.
The default (factory shipment) IP address of EQ100 is 192.168.200.200.
By allowing connection of a computer to EQ100, an EQ project can be written to EQ100 using
the Web UI function.
Web UI Screen
LAN
EQ100
LAN or Sub-LAN Connection Port
■
Required Items
- A computer with a target Web browser (Internet Explorer 8/9/10) installed
- EQ100
- LAN cable (either a straight or a crossover cable is available for direct connection)
■
Steps
1) Connect a computer and EQ100 via LAN.
2) Turn on the power of EQ100.
3) Change the computer's IP address so as to connect to EQ100.
Configure the following settings. For IP address setting details, refer to computer's manuals.
The table below is an example of an EQ100 IP address upon factory shipment. If you have
changed the EQ100 IP address already, configure the computer's IP address based on the
actual EQ100 IP address.
IP Address
Set to "192.168.200.***".
For "***", specify a number from 2 to 199 or from 201 to 254.
Subnet Mask
255.255.255.0
Default Gateway
Setting not required
4) Use a Web browser for access to the Web UI screen.
In the URL field of the browser, enter the EQ100 IP address.
Содержание EQ100-E
