Omron EQ100-E, Руководство пользователя

Страница: 7 / 256

5
Precautions for Safe Use
Observe the following precautions to ensure safe operation.
1) Do not store and manage, install, or use the product in any of the following ways.
・
In a place with large vibrations or which is greatly influenced by shocks
・
Outdoors or in a place directly exposed to sunlight, or exposed to wind and rain
・
In a place at a temperature and humidity outside the specification range
・
In a place with great changes in temperature and humidity, or where there is a
possibility of condensation
・
In a place affected by static electricity or noise
・
In a place with corrosive gas (particularly sulfide gas or ammonia gas)
・
In a place with a lot of dust or iron powder
・
In a place which is flooded or covered in oil
・
In a place with splashing salt water
2) Before using the device, you must check the wiring before connecting it to the power. Not
doing so may result in electrocution, faults, accidents, injury, or incorrect operation due to
incorrect wiring.
3) Use an appropriate electrical power source and wiring to connect the product to an
electrical power source and in/output. Not doing so may result in electrocution, faults,
accidents, injury, or incorrect operation due to incorrect wiring.
4) Do not use voltage greater than the standard one for generic input terminals.
5) Do not use voltage and do not connect a load greater than the standard for generic input
terminals.
6) Carry out wiring by using a solderless terminal which appropriate fits the size of the
terminal screw size.
7) Do not block the air ventilation holes of this product and the area surrounding them, in
order to allow heat to be emitted.
8) Do not install this product near to machines which emit large amounts of heat (heaters,
transformer, large capacity resisters, etc.)
9) In installation work, Type D earthing (Type 3 earthing) must be used.
10) Be sure to firmly secure the product with DIN rail or screw mounting before use.