Omron CX-Programmer 9, Руководство по эксплуатации

Страница: 465 / 542

PART 3: CX-Server Runtime
OMRON CHAPTER 3 – Communications
Revision 2.0 CX-Server Runtime_Page 21
Target PLC Host Link unit number
CX-Programmer Ver.5.0 or later
Serial
Gateway
Set the relay PLC.
(Select in the Change PLC Dialog Box.)
Serial Communications Board/Unit with unit Ver.1.2 or later
(Select SCU (Unit 0 to 15) in the UNIT field.)
Network Type:
Select
[PLC2]
.
Serial Gateway function port (Select
port 1/2 in the PORT field according
to the calculated address.)
Select the Use SYSWAY with the port option in the Host Link
(SYSWAY) settings.
Host Link FINS
Enter the Host Link unit number in the Host Link Unit Number field for
the target PLC in the Host Link (SYSWAY) settings.
System Configuration Example
Device Name: PLC1
Device Name: PLC2
1. Register the PLC to be connected serially (using Host Link FINS) in the project gateway (e.g.,
PLC2).
2. In the Change PLC Dialog Box of the target PLC (e.g., PLC1), select the relay PLC (gateway
PLC) in the Network Type pull-down menu (e.g., [PLC2] (See note.)) and click the Settings
Button to the right of the Network Type pulldown menu.
Note The PLC name enclosed in square brackets (e.g., [PLC2]) indicates the gateway PLC.
Select the relay PLC (e.g., [PLC2]) as the
network type.
3. The Network Settings Dialog Box will be displayed. Click the Guide for Serial Gateway
Button.
Click this button.
4. The Serial Gateway Guide Dialog Box will be displayed. Select the unit and the port number
under the Calculate Address Area .