Omron CX-Programmer 9, Руководство по эксплуатации

Страница: 374 / 542

PART 2: CX-Server PLC Tools
CHAPTER 10 – Data Links OMRON
CX-Server PLC Tools_Page 124
Automatically Set Data Links
This section explains how to make the settings for automatically set data links.
Make the settings in the Automatic Datalink (Controller Link) or Automatic Datalink (SYSMAC LINK) dialog
box.
First make the settings for data link operation at PLC startup, and for the automatic data link setup parameters, and
then transfer the data to the startup node.
When using automatically set data links, there is no need to create data link tables with the Data Link Editor.
Procedure Through Data Link Startup
Start the data links.
Datalink Component Data Link Status
operation
1)
Online | Status
2) Select the Run option in the Operation
field, and then click the Set button.
Turn ON the power to the PLC.
Create a CX-Server file (*.CDM) for connecting online.
1) Select
New
from the
Project
menu and save the setting under a file name.
2) Select Add Device from the Project menu, and register the PLC (as a node on the
network).
Connect online to the startup node PLC (registered as a node on the network).
(Select the startup node PLC and then select PLC | Open from the CX-Net.)
Set the automatic data link setup parameters.
1) Select Data Link | Setup .
2) Select
Controller Link Unit
or
SYSMAC LINK Unit
as the Communications Unit
mounted to the PLC. (For the local network only, i.e. when the network address is 0.)
3) Select PLC | Setup in the Datalink Component window.
4) Select Automatic in the Generation Type field in the Automatic Datalink dialog box,
and make the settings for the automatically set data link areas (start word, size, and
nodes participating in data links, for Area 1 and Area 2).
4) To have the data links started when
the PLC is started, set Start for the
status at startup.
Transfer the automatic data link setup parameters to the startup node. (Click the
Write button.)