Omron CX-Programmer 9, Руководство по эксплуатации

Страница: 176 / 542

PART 1: CX-Programmer
CHAPTER 4 – Reference OMRON
CX-Programmer _Page 96
4. Click the Paste Button.
The addresses will be automatically incremented and the program section will be
automatically pasted. The I/O comments will be automatically created.
By default, symbol names and I/O comments are created automatically according to the following rules.
Item
Rule for automatic
creation
Contents Example
Symbol name Increment the numbers
found from tail. Symbol names are searched for numbers
from the end and the first number that is
found is incremented. If a number is not
found, a serial number is added following
an underscore character. If Name1_1 is found, then
Name1_2 is automatically
created.
I/O comment Increment the numbers
found from tail. I/O comments are searched for numbers
from the end and the first number that is
found is incremented. If a number is not
found, a serial number is added following
an underscore character. If Cmt1_1 is found, then
Cmt1_2 is automatically
created.
To change the automatic generation rule from the default, click the Advanced Button in the Address Incremental
Copy Dialog Box and change the setting as shown below.