Omron CX-Programmer 9, Руководство по эксплуатации

Страница: 303 / 542

PART 2: CX-Server PLC Tools
OMRON CHAPTER 5 – Data Trace/Time Chart Monitor Component
CX-Server PLC Tools_ Page 53
Settings on [Settings] tab
Set operation conditions of Data Trace. Select [Settings] Tab on [Data Trace Configuration] dialog box.
Item Function
[Trace Type] Select Data Trace type.
The above screen displays the settings when [Trace] is
selected.
∗ Please refer to “Settings of Continuous Data Trace” for the
settings when [Trace(Continuous)] is selected.
[Sampling Settings] Select sampling conditions of Data Trace.
[Fixed Interval]
Sample with fixed interval. Set sampling cycle in milliseconds.
I/O data per sampling cycle will be sampled.
[Once Per Cycle]
1 Sample per scan. I/O data will be sampled after END
instruction is executed.
[Once Per Synchronous Operation Cycle]
1 Sample per synchronous operation cycle. I/O data will be
sampled after END instruction of synchronous operation cycle is
executed.
[On TRSM Instruction]
Sample when TRSM Instruction is executed. I/O data at TRSM
Instruction will be sampled.
[Left Operand] Input Symbol or the address to be trigger object. Select data
type from Combobox.
1ch data, 2ch data and 4ch data can be set on CJ2 CPU. 1ch
data can be set on PLC of CS/CJ/CP Series other than CJ2
CPU. [Trigger
Settings]
[Browse] Search trigger object from Symbol Table.