Omron CX-INTEGRATOR - V1.1, Руководство по эксплуатации

Страница: 32 / 338

1-2 Specifications
1-2-2 Files Created by the CX-Integrator
1-2-2 Files Created by the CX-Integrator
The following files can be created by the CX-Integrator.
Files Contents Details
Project files (.cin) Connection
information to relay
PLC, all network
configurations for
target PLC, and
parameters for
DeviceNet masters,
DeviceNet slaves,
and CompoWay/F
slaves These files are used offline to check network configurations and parameters
and for other purposes, such as printing. Each file consists of the following:
Device type setting information of the relay PLC
Communications Unit models connected to the target PLC (Ethernet Units,
Controller Link Units, SYSMAC LINK Units, DeviceNet Units, and Serial
Communications Boards/Units)
Device models connected to the above CPU Units or Communications
Units via communications (DeviceNet slaves, CompoWay/F slaves,
NS-series PTs, etc.)
Parameters for DeviceNet Master Unit and Device parameters and
DeviceNet slaves (for all devices for which EDS files are installed on the
computer including slaves from other manufacturers)
Parameters for CompoWay/F slaves (for all components for which CPS
files are installed on the computer (except for Temperature Controllers)
Controller Link network parameters
Controller Link and SYSMAC LINK Unit allocated DM Area words settings,
including automatically set data link parameters
Ethernet Unit CPU Bus Unit System Settings
Serial Communications Board/Unit serial communications settings
Note: Routing tables (local network tables and relay network tables) and
user-set data link tables are not included in project files.
DeviceNet network
structure files (.npf) Network configuration for one DeviceNet network connected directly to the
target PLC (including master and slave parameters)
Note: These are the same as the DeviceNet network structure files (.npf)
created with DeviceNet Configurator version 2. @ . Files created with
DeviceNet Configurator version 2. @ can be imported/exported.
Network
configuration files
Controller Link node
files (.crg) Network configuration for Controller Link networks connected directly to the
target PLC
DeviceNet device
parameter files
(.dvf) Parameters for individual DeviceNet devices (master or slave)
Note: These are the same as the DeviceNet device parameter files (.dvf)
created with DeviceNet Configurator version 2. @ . Files created with
DeviceNet Configurator version 2. @ can be imported.
Component
parameter files
CompoWay/F
component
parameter files
(.xml) Parameters for individual CompoWay/F slaves (except for Temperature
Controllers)
CPU Unit parameters (parts of PLC Setup: serial communications settings)
Controller Link or SYSMAC LINK network parameters
Controller Link and SYSMAC LINK Unit allocated DM Area words settings,
including automatically set data link parameters
Ethernet Unit CPU Bus Unit System Settings
Serial Communications Board/Unit serial communications settings
Controller Link data
link table files (.cl2) Controller Link user-set data link tables
Note: These are the same as the Controller Link data link table files (.cl3)
created with the CX-Net. Files created with the CX-Net can be
imported.
Data link table files
SYSMAC LINK data
link table files (.sl3) SYSMAC LINK user-set data link tables
Note: These are the same as the SYSMAC LINK data link table files (.sl3)
created with the CX-Net. Files created with the CX-Net can be
imported.
1-12