Omron CX-INTEGRATOR - V1.1, Руководство по эксплуатации

Страница: 275 / 338

6-15 Using General-purpose Tools to Set Devices
6-15-1 Setting Device Parameters with Class Instances
4. Designate the service.
There are two ways to designate the service code, using the generic service code
defined by DeviceNet or designating it directly. To use the generic service code
defined by DeviceNet, check the
Generic option, then 4. Select the desired service
from the drop-down list. To designate the service code directly, check the Custom
option, then input the service code in a HEX format string.
Designating the Generic Service Code
Defined by DeviceNet Designating the Service Code Directly
5. Designate the class and instance parameters for reading and writing data.
6. Input the data corresponding to the designated service.
7. After all of the items have been input, click the
Send Button. The device response
will be displayed in the Result area.
8. Click the Close Button to quit device parameter setting. This completes the device
parameter setting.
1. Parameter Reading Example
1) Check
the Generic option in Service , then select Get Attribute Single from the
drop-down list.
2) Designate the class and instance of the parameter to be read.
3) Input
Data Area for the Attribute of the parameter to be read.
4) Click the Send Button. The value that was read will be displayed in the Result
area.
2. Parameter Setting Example
1) Check
the Generic option in Service , then select Set Attribute Single from the
drop-down list.
2) Designate the class and instance of the parameter to be set.
3) Input
Data Area for the Attribute of the parameter to be set.
4) Input the attribute followed by the value to be set for the parameter in the Data
area.
5) Click the Send Button.
6-71