Omron CX-INTEGRATOR - V1.1, Руководство по эксплуатации

Страница: 206 / 338

6-1 DeviceNet Setting Procedures
6-1-1 Designing Networks Offline
6-1 DeviceNet Setting Procedures
This section describes the setting operations that are unique to DeviceNet networks.
Refer to
Section 2 Basic Operations for operation that are the same as those for other
networks.
The following flowcharts show the overall flow of DeviceNet settings.
6-1-1 Designing Networks Offline
Prior to constructing the actual network, it can be designed and the master and slave
parameters can be set with the CX-Integrator.
The set parameters can be saved as a network configuration file. The network
configuration file contains the parameters of all of the devices on the network.
2-9 File Operations
6-5 Editing Master Parameters
6-3 Adding Slaves to the Master
6-2 Setting Slave Parameters
2-5 Creating Virtual Network Structures Offline
Start the CX-Integrator.
Set the master’s parameters.
Register the slaves with the master.
Create the virtual network offline.
Set the slave parameters
(only for the slaves that require parameter setting).
Save the settings in a CX-Integrator project file (.cin).
6-1-2 Downloading Saved Parameters
The parameters for all of the devices on the network can be set (downloaded) from a
network configuration file saved in advance.
2-6 Manipulating Component Parameters
2-7 Uploading, Downloading, and Comparing Network
Parameters
Start the CX-Integrator.
Download to the network or download
parameters to each device.
Read the CX-Integrator project file (.cin).
Connect to the network (online).
2-2 Connecting Online to the Relay PLC
2-9 File Operations
6-2