Omron CX-INTEGRATOR - V1.1, Руководство по эксплуатации

Страница: 261 / 338

6-13 Uploading and Verifying Device Parameters
6-13-1 Uploading the Network Configuration
6-13 Uploading and Verifying Device Parameters
Uploading device parameters refers to writing the parameters from the actual network
devices to the virtual network in the CX-Integrator. Verifying device parameters refers
to comparing the parameters in the actual network devices with those in the
CX-Integrator.
This section explains how to do both of these operations.
Note When the network configuration is uploaded, the parameters for each device will all be
read.
6-13-1 Uploading the Network Configuration
Network - Transfer [Network to PLC]
To read the actual network configuration, use the following procedure.
1. While online, right-click the DeviceNet Unit below
TargetPLC in the Online
Connection Information Window and select Connect from the popup menu.
2. Right-click the DeviceNet Unit and select Transfer [Network to PLC] from the
popup menu.
Uploaded devices will be displayed in the Network Configuration Window.
6-13-2 Uploading Device Parameters
The following two methods can be used to read parameters from network devices.
1) Reading parameters from the Network Configuration Window
2) Reading parameters from the Edit Device Parameters Dialog Box
Using Network Configuration Window
Component - Parameter - Upload
To upload the parameters through the Network Configuration Window, use the
following procedure.
1. Select the device or devices in the Network Configuration Window. (More than one
device can be selected by holding down the Ctrl Key while clicking the devices.)
2. Select Component - Parameter - Upload .
The following confirmation dialog box will be displayed.
3. Click the Yes Button.
The progress window will be displayed and the parameters will be uploaded.
Using Parameter Edit Window
Component - Parameter - Edit - Upload Button
To upload the parameters through the Edit Device Parameters Window, use the
following procedure.
1. Select the device from the Network Configuration Window.
2. Select
Component - Parameter - Edit .
3. Click the Upload Button.
6-57