Omni 4000 Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 11 / 193

OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
1-3
The OMNI 4000/7000 Series
1.3.1 IEC Test Procedure Compliance
To meet the standards/directives in Section 1.3, the OMNI 4000/7000 models comply with the
IEC test procedures listed in this section.
IEC 60068-2-1 Environmental testing
–Part 2-1: Tests–Test A: Cold
IEC 60068-2-2 Environmental testing
–Part 2-2: Tests–Test B: Dry heat
IEC 60068-2-47 Environmental testing
–Part 2-47: Test–Mounting of specimens for vibration,
impact and similar dynamic tests
IEC 60068-2-64 Environmental testing
–Part 2-64: Tests–Test Fh: Vibration, broadband
random and guidance
IEC 60068-3-1 Environmental testing
–Part 3: Background information–Section One: Cold
and dry heat tests
IEC 60068-3-4 Environmental testing
–Part 3-4: Supporting documentation and guidance–
Damp heat tests
IEC 60654-2 Operating conditions for industrial-process measurement and control
equipment
–Part 2: Power
IEC 61000-2-1 Electromagnetic Compatibility (EMC)
–Part 2: Environment–Section 1:
Description of the environment
–Electromagnetic environment for
low-frequency conducted disturbances and signaling in public power supply
systems
IEC 61000-4-1 Electromagnetic Compatibility (EMC)
–Part 4-1: Testing and measurement
techniques
–Overview of IEC 61000-4 series
IEC 61000-4-2 Electromagnetic Compatibility (EMC)
–Part 4-2: Testing and measurement
techniques
–Electrostatic discharge immunity test
IEC 61000-4-3 Electromagnetic Compatibility (EMC)
–Part 4-3: Testing and measurement
techniques
–Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4 Electromagnetic Compatibility (EMC)
–Part 4-4: Testing and measurement
techniques
–Electrical fast transient/burst immunity test
IEC 61000-4-5 Electromagnetic Compatibility (EMC)
–Part 4-5: Testing and measurement
techniques
–Surge immunity test
IEC 61000-4-6 Electromagnetic Compatibility (EMC)
–Part 4-6: Testing and measurement
techniques
–Immunity to conducted disturbances, induced by
radio-frequency fields
IEC 61000-4-8 Electromagnetic compatibility (EMC)
–Part 4-8: Testing and measurement
techniques
–Power frequency magnetic field immunity test
IEC 61000-4-17 Electromagnetic Compatibility (EMC)
–Part 4-17: Testing and measurement
techniques
–Ripple on D.C. input power port immunity test
IEC 61000-4-29 Electromagnetic Compatibility (EMC)
–Part 4-29: Testing and measurement
techniques
–Voltage dips, short interruptions and voltage variations on D.C.
input port immunity tests
IEC 61000-6-1 Electromagnetic compatibility (EMC)
–Part 6-1: Generic standards–
Immunity for residential, commercial and light-industrial environments
IEC 61000-6-2 Electromagnetic compatibility (EMC)
–Part 6-2: Generic standards–
Immunity for industrial environments
IEC 61000-6-4 Electromagnetic compatibility (EMC)-Part 6-4: Generic standards
–Emission
standard for industrial environments