OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
3-13
OMNICONNECT® Operations
9.
When you are finished with the
Setup
screen, click
Apply
to save your changes.
10.
a. Click on the
1994 Analysis
tab.
Depending on which
Density Method
you chose, the analysis overrides
available on this screen may change.
b. Enter the necessary
GC Component
Analysis Overrides
.
11.
Continue to move down the list of products
in the tree to configure new products or
make changes to existing products.
12.
a. If the flow computer is equipped with
a Gas Chromatograph (selected on
the
Equipment List
screen found on
Configure
tree >
General Setup
item
>
Equipment List
tab), select and
expand
Gas Chromatograph
on the
tree.
b. Select
GC 1
to display its
configuration settings in the screens
on the right.
These override values can be
obtained by a laboratory analysis of
the product, or they can be written
through Modbus writes.
Содержание 4000 Series
Страница 1: ...Series 4000 7000 Operations Maintenance Guide...
Страница 21: ...OMNI 4000 7000 Operations and Maintenance Guide Rev F 2 4 OMNI 4000 7000 Overview Figure 2 2 OMNIPANEL...
Страница 23: ...OMNI 4000 7000 Operations and Maintenance Guide Rev F 2 6 OMNI 4000 7000 Overview Figure 2 4 OMNI Modbus Tester...
