OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
6-1
Front Panel Operations
6. Front Panel Operations
At various points during front panel operations you may be prompted to log in to the
flow computer. If you do not know your password, contact your flow
computer Administrator.
The default Administrator password is 00 (ID) 0000 (PIN).
6.1
Observing Flow
6.1.1 Meter Runs
To access current Meter Run flow measurements, follow these instructions:
1.
a. In the
Home
menu, use the arrow
navigation keys to go to and select
Meter Runs
.
b. Press the
OK
key.
2.
a. Use the
Up
or
Down
arrow navigation
keys to select the Meter Run you wish
to access.
b. Press
OK
to go to the detail screen
for that Meter Run.
The yellow dots on this screen indicate that the Meter Run is not receiving a real
signal, or it is in override or a simulated mode. The red dots indicate that an alarm
has been triggered.
Alternatively, you can also press
the
Mtr Runs
function key along
the bottom of the screen to access
the same
Meter Runs
screen as
shown in Step 2.
Press the
Prove
function key to go
to the
Prover Control
screen
(Section 6.3 Proving Functions).
Press the
Reports
function key to
go to the
Reports
screen (Section
Содержание 4000 Series
Страница 1: ...Series 4000 7000 Operations Maintenance Guide...
Страница 21: ...OMNI 4000 7000 Operations and Maintenance Guide Rev F 2 4 OMNI 4000 7000 Overview Figure 2 2 OMNIPANEL...
Страница 23: ...OMNI 4000 7000 Operations and Maintenance Guide Rev F 2 6 OMNI 4000 7000 Overview Figure 2 4 OMNI Modbus Tester...
