OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
4-9
OMNICONNECT® Reports
The
Report View
tab allows you to view the report as it would look when it is
printed. You can check the final alignment of values and make changes in the
Formatted View
or
Raw View
tabs, but you cannot edit the template in the
Report
View
tab.
12.
Click on the
Raw View
tab. This tab allows
you to see Modbus field descriptions, the
Modbus registers used to populate the
values, eac
h printed value’s maximum
width and the decimal placement for each
value.
13.
a. Edit the template in this screen by
placing the cursor in any position
within the template and simply using
your keyboard to make changes.
b. When finished editing in the
Raw
View
tab, click
Apply
to save your
changes to the entire template.
14.
a. Continue to import custom templates
for the other types of reports, as
needed.
b. When finished, return to the
Report
Setup
option in the
Configure
tree
and verify that the templates you
have imported match the templates
you have selected in the
Report
Template Selection
group (go back
to Steps 1 through 3).
The “$” symbol indicates that the
Modbus register number that
follows is where the printed value
will be retrieved from.
Содержание 4000 Series
Страница 1: ...Series 4000 7000 Operations Maintenance Guide...
Страница 21: ...OMNI 4000 7000 Operations and Maintenance Guide Rev F 2 4 OMNI 4000 7000 Overview Figure 2 2 OMNIPANEL...
Страница 23: ...OMNI 4000 7000 Operations and Maintenance Guide Rev F 2 6 OMNI 4000 7000 Overview Figure 2 4 OMNI Modbus Tester...
