![background image](http://html1.mh-extra.com/html/omega/rd-mv100-series/rd-mv100-series_user-manual_4186217118.webp)
5-13
Measurement Channel Settings
5
5.7
Skip Setting
These channels will not be measured or displayed. The range cannot be changed while
data acquisition or computation is in progress.
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press
MENU
.
To display the setting screen press the soft key
#1
.
1
2
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1.
First channel and last channel
Select the desired channels.
2.
Mode
Set the mode to [Skip].
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
Содержание RD-MV100 Series
