Omega RD-MV100 Series, Руководство пользователя

Страница: 250 / 299

12-1
Troubleshooting
12
Chapter 12 Troubleshooting
12.1 A List of Messages
Occasionally, error codes and messages appear on the screen while using the recorder.
The entire list of messages is given below. Error codes and messages related to
communications are also listed here.
The messages are displayed in the language that you have chosen. For the procedures
regarding language selection, see section 10.10.
However, the following messages are displayed only in English.
• messages displayed on tne error log screen
• messages corresponding to communication commands
Errors Related to Parameter Settings
• Setting Errors
Code Message Explanation/Countermeasures/Ref. Section
1 System error. Contact your nearest Omega dealer.
2 Incorrect date or time setting. See section 3.7.
3 A disabled channel is selected. See Communication Interface User’s Manual.
4 Incorrect function parameter. See Communication Interface User’s Manual.
5 The input numerical value exceeds the set range. Enter a proper value.
6 Incorrect input character string. Enter a proper character string.
7 Too many characters. Enter specified number of characters.
8 Incorrect input mode. See Communication Interface User’s Manual.
9 Incorrect input range code. See Communication Interface User’s Manual.
21 Cannot set an alarm for a skipped channel. See Communication Interface User’s Manual.
22 The upper and lower span limits are equal. See sections 5.1 to 5.7.
23 The upper and lower scale limits are equal. See sections 5.5 and 5.6.
30 The partial boundary value exceeds the range of the span. See section 7.11.
31 Partialexpansion display is set ON for a SKIPPED channel. See Communication Interface User’s Manual.
35 The upper and lower limits of the display band are equal. See section 7.9.
36 The lower limit of the display band is greater than the upper limit. See section 7.9.
37 The display band is narrower than 4% of the entire display. See section 7.9.
40 Incorrect group set character string. See section 7.6.
41 There is no specified input channel. See Communication Interface User’s Manual.
42 Exceeded the number of channels which can be set. See Communication Interface User’s Manual.
43 A channel number cannot repeat in a group. See section 7.6.
45 There is no character string saved in the clipboard. Copy a character string to the clipboard.
46 The character string saved in the clipboard is too long. Paste a character string with the specified number
of characters.
61 There is no channel specified by the MATH expression. See section 11.4.
62 MATH expression grammar is incorrect. See section 11.2.
63 MATH expression sequence is incorrect. See section 11.2.
64 MATH upper and lower span values are equal. See section 11.4.
70 The range of the MATH constant is exceeded. See section 11.4.
71 Set range of the MATH constant is exceeded. See section 11.6.
81 All space or ‘quit’ string cannot be specified. See section 10.4.
83 Duplicate used combination of user ID and password. See section 10.4
85 The login password is incorrect. See section 10.1.
86 The key-lock release password is incorrect. See section 10.1.
87 This key is locked. See section 10.1.
88 This function is locked. See section 10.1.
89 Press [FUNC] key to login. See section 10.3.