Omega RD-MV100 Series, Руководство пользователя

Страница: 144 / 299

7-10
7.7 Setting the Trip Line (Trend)
A line to indicate a particular value of interest (trip line) can be displayed on the trend
display.
• The maximum number of trip lines that can be displayed in one group is four.
• The position of the trip line is specified as a percentage of the display span.
• You can specify the thickness of the trip lines. See section 7.13.
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press the soft key
Next 1/3
.
Press the soft key
#5
.
To display the setting screen press the soft key
#1
.
1
2 3 4
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Group number
Select the group number (1 to 4).
2. On/Off
Move the cursor to the desired trip line and press the [On] soft key.
On : Use the trip line. The [Position] and [Color] boxes appear.
Off : Not use the trip line.
3. Position (display position)
Specify the display position of the trip line in the range 0% to 100% of the
display span.
4. Color
Select the color of the trip line from 16 colors.