Omega RD-MV100 Series, Руководство пользователя

Страница: 159 / 299

7-25
Setting and Operating the Display
7
7.14 Setting the Brightness of the Screen and the
Backlight Saver Function
• There are eight screen brightness settings which can be selected (1 to 8).
• The lifetime of the LCD backlight can be extended by automatically dimming the light
when there has been no key operation for a certain amount of time. The screen will
return to the original brightness with a key operation or an alarm occurrence. The
initial setting is [Off].
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press the soft key
Next 1/3
.
Press the soft key
#5
.
To display the setting screen press the soft key
#4
.
1
2
3
4
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
Setting the brightness of the screen
1. Brightness
Select from 1 to 8. A higher number corresponds to a brighter screen setting.
Setting the backlight saver
2. On/Off
When [On] is selected, [Saver time] and [Restore] boxes are displayed.
3. Saver time
Select the time from 1 min, 2 min, 5 min, 10 min, 30 min, and 1 hour.
If the specified time elapses without any key operation, the LCD backlight is
automatically dimmed.
4. Restore
Select [Key] or [Key + Alm] (Key + Alarm).
Key : The screen will return to the original brightness with a key operation.
Key + Alarm : The screen will return to the original brightness with a key
operation or an alarm occurrence.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.