Olivetti OFX 1200, Инструкция по эксплуатации

Страница: 74 / 153

DIALLING
67
HOW TO PROGRAM SPEED DIAL CODES
In addition to the one touch keys, your fax machine also provides the facility to store a further 32 fax or
phone numbers under the speed dial codes (01-32). The 32 codes are programmed by selecting a phone
number and fax number for each one. Once these keys have been programmed, an
electronic agenda
is
created which contains up to
32
telephone numbers and
32
fax numbers which can be dialled by pressing
the
speed dial key
and inputting the programmed code. When you press the
speed dial key
followed by
the programmed code either the fax number or the telephone number will be dialled depending on whether
or not there is a document in the feeder (refer to the charts at the end of this section).
Speed dial codes are programmed in the configuration parameters (see section:
CONFIGURATION
PARAMETERS,
heading:
Programming chart and description of the sub-menu: Coded Speed Dial).
Along with the fax and phone numbers you can also store additional information under the speed dial
codes. The following table lists all the parameters that may be programmed for a single speed dial code
together with the memory capacity and a programming example..
Coded speed dial parameters:
PARAMETERS CAPACITY PROGRAMMING EXAMPLE
Fax number Max. 38 digits 780300
Phone number Max. 38 digits 123456
Speed 4800/9600 9600 bps, 4800 bps 9600 bps
Overseas YES/NO YES
Name Max. 16 characters Brown
An example is given below:
Example:
The following example describes how to program the speed dial code
01
with the information given in the
table above.
v
The display shows the operating mode with time and date.
1.
Press
FUNCTION
to select the “FAX SET-UP” menu.
2.
Press
START
to select VARIOUS SETTINGS and then press
FUNCTION
until you select the CODED SPEED DIAL sub-menu.
3.
Press
START
.
The display shows the cursor at the point at which you must enter
the code to be programmed.
4.
Enter 01 from the numeric keypad.
☞
AUTOMATIC RX
21-02-95
10:30
FAX SET-UP
FUNC/START/STOP
CODED SPEED DIAL
FUNC/START/STOP
TYPE SPEED NO.
(01-32):
FAX NO.
START/STOP/
ß
/
à