manualshive.com logo in svg

Olivetti OFX 1200, Инструкция по эксплуатации

Поделиться
Скачать
Olivetti OFX 1200 Скачать руководство пользователя страница 118

114

THE TELEPHONE ANSWERING DEVICE

SYNTHESIZED MESSAGES

Synthesized messages are standard messages that are always present in the memory. These messages
are available in English only and can be enabled or disabled. If enabled, they present the messages that
have been received on the TAD during your absence.

The table below describes the 5 messages available.

No.

MESSAGE IN ENGLISH

MEANING

1

You have nn messages

Indicates the number of messages received on the TAD (nn =
from 1 to 59)

2

Monday, Tuesday etc.

Indicates the day on which the message was received

3

0/ 12 AM or PM

Indicates the time at which the message was received (from 0 to
12 plus the abbreviation AM or PM)

4

End of messages

Indicates that all the incoming messages have been played

5

You have no messages

Indicates that no messages have been received

The synthesized messages are enabled from their sub-menu as described in: 

Programming chart and

description of the sub-menu: synth. announce.

The day of the week must be programmed from its sub-menu as explained in 

Programming chart and

description of the sub-menu: day of week.

The day of the week, as far as incoming messages are concerned, must always be the current one.

Having enabled the synthesized messages, when the 

>/II

 key is pressed, the TAD will answer as specified

in the table above.

If, for example, messages have been received, the TAD will start by playing synthesized message no. 1
followed by nos. 2 and 3 and then the incoming message will be played. Synthesized messages 2 and 3
will precede each incoming message received on the TAD. When the TAD has finished playing all the
incoming messages, it will play synthesized message no. 4.

Содержание OFX 1200


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды