Olivetti OFX 1200, Инструкция по эксплуатации

Страница: 26 / 153

CONNECTION AND INITIAL SET-UP
13
CONNECTION TO THE TELEPHONE LINE (CASE 2)
Fax Machine
The connection between the fax machine and telephone line is made using the cable provided. Do not use
other cables, otherwise the fax machine may not work properly.
1.
Insert the "western" connector (which is small and transparent) of the telephone line connection
cable into the "LINE" socket on the fax machine. You will hear a click when it is correctly inserted
(see the diagram which follows).
The fax’s connection sockets are situated on the rear left-hand side of the casing. The socket
marked TEL2 must not be used.
2.
Insert the "TAE" connector at the other end of the cable into the telephone line wall socket
marked "N" (see the diagram which follows).
Telephone supplied
1.
Remove the precut cover, if present, from the connection socket (TEL1) on the fax machine,
then insert the "western" connector of the telephone cable into this socket. You will hear a click
when it is correctly inserted (see the diagram which follows).