Grounding:
This machine must be grounded while in use to protect the operator from electrical shock. The
machine is equipped with an approved three-conductor cord and three-prong grounding type
plug to fit the proper grounding receptacle. The green (or green and yellow) conductor in the
cord is the grounding wire. Never connect the green (or green and yellow) wire to a live ter-
minal.
Warning:
Never operate a machine that is not properly grounded.
If it is for use on 150 to 250 volts, it has a plug like that shown in Figure D.
An adapter, Figures B & C, is available for connecting Figure A plugs to two-plug receptacles.
The green-colored rigid ear, plug etc., must be connected to a permanent ground, such as a
properly grounded outlet box. No adapter is available for a plug as shown in Figure D.
Adapter shown in Figures B & C is not for use in Canada.
Motor:
This machine is powered by a 1 HP (model E) or 1.5 HP (model F) AC motor. Be sure your
power supply agrees with the voltage marked on nameplates. Incorrect voltage will cause the
motor to draw excessive current resulting in motor burn-out or blown fuse or circuit breaker.
Extension Cords:
Machines that have 3 wire cords requiring grounding must only be used with extension cords
that have 3-prong grounding type plugs and 3-pole receptacles. Use only three-wire exten-
sion cord.
To determine the minimum wire size required, refer to the chart below:
Chart for minimum wire size (AWG) of extension cord
Nameplate
Total Extension Cord Length - Feet
Before using an extension cord, inspect it for loose or exposed wires, damaged insulation and
defective plugs.
CAUTION:
Always disconnect power cable from electrical outlet before working
on this machine.
PHC17F, PHC20F
Floor Machines
This
floor
machine is a high
q u a l i t y, precision
made product. All parts used in manufacturing this floor
machine have passed rigid quality control standards prior to
assembly and an “each unit” final inspection prior to packag-
ing is your assurance of proper assembly. This floor machine
is protectively packed to prevent possible damage in transit.
Should damage have occurred, please file a claim emmediat-
ly with the carrier who delivered the product to you. You must
file the freight damage claim. We, as the shipper, cannot do
this for you.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS:
CAUTION:
Service and repair should be performed only by a qualified technician.
Call 1-800-237-7582 for the location of your nearest Authorized Service
Center.
OPERATION & CARE
INSTRUCTIONS
Rating -
Amps
0-10.0
10.1-13.0
13.1-15.0
25
18
16
12
50
18
16
12
75
16
14
12
100
16
14
12
125
14
14
12
150
14
12
12
175
12
12
12
200
12
12
PHC
