manualshive.com logo in svg

Olivetti OFX 1200, Инструкция по эксплуатации

Поделиться
Скачать
Olivetti OFX 1200 Скачать руководство пользователя страница 65

CONFIGURATION PARAMETERS

57

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: DATE AND TIME

DATE AND TIME

ò

              

a)

FORMAT: DD/ MM/ YY

FORMAT: MM/DD/YY

FORMAT: YY/ MM /DD

ò

                               

b)

FORMAT: 24 H

FORMAT: 12 H

ò

                               

c)

DD/MM/YY       HH:MM
14-06-95            10:30

START:

Confirms selection of the sub-menu DATE AND TIME  and moves down to the associated
parameters. Confirms a 

parameter and the relative value and moves on to the next parameter.

< / > :

 

To select the value of a parameter by scrolling forward and backward through the values available.
Alternatively used to position the cursor on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.

STOP:

Interrupts the programming procedure and returns to the original operating mode display.

DESCRIPTION:
a) 

Allows you to select the desired date format.

b) 

Allows you to select the desired time format. Once the time format parameter has been selected, the
flashing cursor appears so that you can change the date and time.

c) 

Allows you to type in the new date and time.

Reference section:

 

BASIC FUNCTIONS.

Содержание OFX 1200


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды