Olivetti OFX 1200, Инструкция по эксплуатации

Страница: 6 / 153

FOR U.K. USERS FOR U.K. USERS FOR U.K. USERS FOR U.K. USERS FOR U.K. USERS
Notice for Connection to the public telecommunications network
1. BABT Certificate Number/Approval Number for the OFX (1000/1200): see label on the rear of the
machine.
2. This terminal equipment is intended for connection to the public telecommunications network via the
LJU cable shown on pages 13 and 14 of these instructions.
3. This terminal equipment complies with the following approval requirements:
a) Automatic dialling facilities.
b) Automatic storage of last number dialled.
c) Call Progress Monitor facility.
d) Automatic repeat attempt facility.
e) Automatic answering of incoming call.
f) DTMF (tone) dialling.
4. The following facilities are also supported:
a) Storage of telephone numbers for retrieval by a predeterminated code.
b) Operation in the presence or absence of Initial or Secondary Proceed Indication (Dial Tone).
c) Pulse dialling.
NB: Although this equipment can use either loop disconnect or DTMF signalling, only the
performance of the DTMF signalling is subject to regulatory requirements for correct
operation. It is therefore strongly recommended that the equipment is set to use DTMF
signalling for access to public or private emergency services. DTMF signalling also provides
faster call set up.
d) Automatic Fax/Phone recognition facility.
e) Automatic Fax/Telephone Answering Device recognition.
f) Integral Digital Telephone Answering Device (OFX1200 only).
5. An approved simple telephone and/or an approved telephone answering device (OFX1000) can be
series connected to the public telecommunications network via the supplied LJU cable. The LJU socket
allows access to a TNV circuit and is intended for the connection to the telecommunications network
only.
6. The parallel comminications connector, on the rear of the apparatus, is for the indirect connection to
the public telecommunications network of suitable equipment (Personal Computer). Do not connect
equipment that will result in signals at the point of connection to the public telecommunications network
that do not conform to the physical parts of the public network access requirements. Always follow the
suppliers Instructions For Use provided with the parallel communications kit.
Nuovo-1 22/09/00, 14.41 6