Olivetti OFX 1200 Скачать руководство пользователя страница 104

Страница: 104 / 153

100

THE TELEPHONE ANSWERING DEVICE

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: PLAY OGM #1

PLAY OGM #1

PLAYING

OGM NOT RECORDED

FUNCTION:

Confirms the sub-menu setting and moves on to the next sub-menu.

START:

Confirms selection of the sub-menu and moves down to the associated parameters.

STOP:

Aborts the procedure and returns to the original operating mode display.

MEANING:
a)

Plays the OGM #1 recorded or indicates that no message has been recorded.

WARNING:

The sequence illustrated above also applies to the PLAY OGM #2 sub-menu in that the two messages are
handled in exactly the same way.

Reference procedure:

How to play, record and replace outgoing messages.

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: RECORD OGM #1

RECORD OGM #1

START TO RECORD

RECORDING 20

PLAYING

FUNCTION:

Confirms the sub-menu setting and moves on to the next sub-menu.

START:

Confirms selection of the sub-menu and moves down to the associated parameters.

STOP:

Aborts the procedure and returns to the original operating mode display.

MEANING:
a)

Prompts you to record the outgoing message.

Starts recording the outgoing message (max. duration: 20 seconds)

Plays back the outgoing message you have just recorded.

Warning:

The sequence illustrated above also applies to the RECORD OGM #2 sub-menu in that the two messages
are handled in exactly the same way.

Reference:

How to play, record and replace outgoing messages.

Содержание OFX 1200


























































































































































Результаты поиска

Содержание OFX 1200

Отзывы:

Бренды по названию

Популярные бренды

Olivetti OFX 1200, Инструкция по эксплуатации

Результаты поиска

Содержание OFX 1200

Отзывы:

Бренды по названию

Популярные бренды