OKIDATA OF1000, Руководство по обслуживанию

Страница: 201 / 357

21. You have connected an answering machine to your Okifax 1000 and it does not work.
For an answering machine to function properly, TECHNICAL FUNCTION 45 should be set ON to
enable the TAD Reception Mode. The TAD Reception Mode is enabled when the AUTO REC Key
is pressed. Make sure that TAD is displayed on the LCD when the Okifax 1000 is in the idle mode.
22. The Okifax 1000 is too loud.
Adjust the monitor volume (USER FUNCTION 05).
Adjust the incoming ring volume (the volume switch is located at the rear of the Okifax 1000).
Adjust the BUZZER VOLUME (USER FUNCTION 16).
If you do not want the Okifax 1000 to beep whenever it runs out of paper, set NO PAPER CALL
(USER FUNCTION 11).
23. You keep getting reports that you do not want.
Check the USER FUNCTION settings and disable all unwanted reports.
24. When you receive long faxes or make copies of long documents, the bottom is always
cut off.
Try enabling the RX SPLIT PRINT or COPY SPLIT PRINT functions. These functions will split
long documents across two pages.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)