OKIDATA OF1000, Руководство по обслуживанию

Страница: 289 / 357

23 Document Top Feed Adjusts the Start of Scan
Position of the ADF. The
selectable range is from -7 mm
to +10 mm in 1 mm increments. 0 mm
24 Document End Feed Adjusts the End of Scan
Position of the ADF. The
selectable range is from -10 mm
to +10 mm (in 1 mm increments). 0 mm
25 Sensor Calibration Select ON to enable calibration
of the scanner sensor (CIS).
This setting returns to OFF
once the scanner calibration
procedure has been executed. OFF
26 Phone Dial Switches the alternate FAX
telephone number to a regular
phone number for voice
communication. OFF
27 Service Bit ON: Technician's features are
available. OFF: Technician's
features are not available. OFF
28 Video Parameter Selects the non-photo mode
parameter (P1) and the
photomode parameter (P2) in the
form P1*P2. 1*1
29 MDY / DMY Switches Operator Panel display
and report printing date format
between: MDY: Month/Day/Year
DMY: Day/Month/Year DMY
30 CCITT ECM Enables the use of the CCITT
Error Correction Mode. ON
31 Receive in Memory Enables the Memory RX Function
under the following conditions:
NO PAPER COVER OPEN PAPER JAM ON
32 Page Retransmission Enables page retransmission
from memory if a communications
error exists in non-ECM mode. ON
33 Local Date and Time
Print Enables the printing of the
Date/Time at the top of the
first received page. OFF
34 XTTO Value Selects the time duration (in
seconds) that the Okifax 1000
will wait for a remote
station's answer. 000
35 Receive in Memory
when Low Toner
Condition Exists Enables the Memory RX Function
when a low toner condition
exists. ON
36 RX Error Message
Print Enables or disables the
printing of the message
RECEIVE STOPPED when reception
is interrupted. ON