OKIDATA OF1000, Руководство по обслуживанию

Страница: 143 / 357

Page: 100
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
3.2.34 Image Sensor Assembly
1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.20
3.2.21
3.2.25
3.2.26
3.2.32
2. Remove the four screws (1).
3. Detach the cable from the connector (2).
4. Remove the image sensor assembly (3).
NOTE:
The Cable: Image Sensor connects the image sensor to CN 3 of the PCNT board.
The assembly is made of the sensor, the sensor holder, the ground cable, and the screw. To
replace any of these parts, order the assembly.
Cleaning
Refer to Section 3.4 of this Service Handbook for cleaning details .
Calibration
Refer to Section 4.5.02 of this Service Handbook for CIS Calibration information.
P/N 50405901 Sensor: Image Assembly RSPL B.2.13
P/N 56628302 Cable: PCNT - Image Sensor RSPL B.2.13 ,B.2.17
P/N N/A Holder: Sensor RSPL B.2.13