4. ADMINISTRATING PRINTERS IN NETWORK
47
IP Addr
(OLD) 192.36.253.96
(NEW) 192.36.253.100 [RET]
SUBNET MASK
(OLD) 255.255.255.0
(NEW) [RET]
DEFAULT GATEWAY
(OLD) 192.36.253.254 (NEW) [RET]
The set address command can specify the item to change.
OkiPage>set address ip(or “mask”,”gateway”) [RET]
4.1.3.4 Setting NetWare environment
In Telnet, you set the NetWare environment of this network card. For
setting the NetWare server, use PCONSOLE, NetWare Administrator Utility,
OkiView, etc.
Display/set the NetWare environment.
Display
Command to use:
show protocol or shpro
Target account:
General users and administrator
user
Set
Command to use:
set protocol or sepro
Target account:
Administrator user
The NetWare environment has the following items to be set:
NetWare common:
NetWare Mode:
Set in which of the modes, Queue Server Mode or Remote Printer
Mode, this network card is to be used.
In AUTO Mode, the Queue Server Mode and the Remote Printer Mode
are automatically switched.
Queue Server Mode
Print Server Name:
Set the name of the print server.
Polling rate:
Specify an inquiry interval on if there is a
print queue in the file server.
Queue Server Mode(bindery)
File Server Name:
Specify the file server to which the print
server will be connected.
