3. NETWORK SETUP FOR EACH OPERATING SYSTEM
9
1
Open the “Control Panel” icon by double-clicking it.
2
Double-click the “Network” icon.
3
Click “Add...” button on “Service” screen to add “Microsoft TCP/
IP print”.
4
Click “OK” button and end setting up “Network” .
5
Double-click “Printer” icon.
6
Double-click “Add Printer”.
7
“Printer add wizard” is displayed. For printer management, select
“This computer” and click “Next>” button.
8
On the port selection screen, click “Add port...” button.
9
Select “LPR Port” on “Printer Port” screen and click “New Port...”
button.
0
On “Add LPR compatible printer “ screen, enter IP address
*1
to
be assigned to this Network card in the text box “Server name or
address which provides lpd:” , and an appropriate name by which
this printer name can be distinguished from others on the network,
in the text box “Printer name or printer queue name on the Server:”,
and click “OK” button.
A
The address and the printer name just added are added to “Usable
ports” of “Printer Add Wizard” and the check box(es) is checked.
B
Click “Next” button.
C
Click “Use disk...” of “Printer Wizard”.
D
Insert Install disk which comes with the printer into the disk drive
and click “OK” button.
E
Add the printer driver, according to the messages of the setup
screen.
F
Click “Print test page” button from “Printers” of the Control Panel.
The set up is complete when the test pages are printed.
*1 For the IP address setup when DHCP Server is used, please refer
to Section 3.2.6, “Setting up IP Address in DHCP Server Envi-
ronment”.
3.2.2
Setting up Windows NT3.51 Server
Log on to the Windows NT from the administrator account or an account
of a person who has the administrative privilege.
1
Open the “Control Panel” icon by double-clicking it.
2
Double-click the “Network” icon.
3
Click “Add software...” button on “Network setup” screen.
