3. NETWORK SETUP FOR EACH OPERATING SYSTEM
21
Enter key.
7
Press the Insert key in “Service printers”, select the directory where
the printer you wish to connect is located from “Object, class”,
press the Enter key to have the name of the printer to be connected
displayed, and select it.
8
When the printer name is displayed in “Service printers”, press
the Enter key to open the “Set printer environment of ‘Printer
name’”.
9
Select “Assign print queue:” and press the Enter key.
0
Press the Insert key in “Print queues”, select the print queue to
connect from “Object, class” and press the Enter key.
A
When the print server to be connected to is displayed in “Print
queues”, press the ESC key, and press ESC key to close the “Set
printer environment of ‘printer name’”, too.
B
Press the ESC key in “Service printers” to end.
Caution: You must set the “Service printer” of
9
above. If you omit this
setting, this network card will not function correctly.
3.2.4.2 Setting up queue server mode in NetWare 4.x and 5 NDS en-
vironment
This network card can serve as a print server and connect Print Queues.
Set print server, print queue and printer in the File Server in the same
manner as described in Section 3.2.4.1, “Setting Up Remote Printer in
NetWare 4.x and 5 NDS Environment”.
If the Print Server is not booted up on the file server side, this network
card of AUTO or Queue Server Mode is connected to the file server as a
print server.
Caution:
• To use OKIPAGE 12i printer in Queue Server Mode, you must not set
the password for the print server. If you set the password, you will not
be able to connect this NETWORK card as a print server. To use
OKIPAGE 12i in Remote Printer Mode, you can connect it without
problem even if the password is set for the print server.
• This Network card does not support the Banner sheet in Queue Server
Mode. Even if you specify the Banner Sheet Printing, it will be ignored.
