3. NETWORK SETUP FOR EACH OPERATING SYSTEM
18
PrintQueue:
Open “Assign” and confirm that the print server and the printer that you
have set are displayed in “Administered Print Servers” and “Printers for
which print queues are serviced”, respectively.
If they are not displayed, do the setting once again in the Print Server and
Printer “Details” window.
Print Server:
Make sure that “Advertising name” matches the print server name. If they
do not match, enter the print server name in “Advertising name”.
Open “Assign” and confirm that the printer that you have set is displayed
in the “Printers”. If the printer is not displayed, click “Add” button and
select the printer from the list to connect it. If the printer is not displayed
in the list, it is created in a different context.
Confirm that the printer number is among 0 through 15.
Open “Print Layout” and confirm that Print server – Printer – Print Queue
that have been set are connected.
Click “Change password” button and check if the password is set in “Cur-
rent password.” If the password is set, this Network card cannot make a
connection in Queue Server Mode. To use this Network card in the Queue
Server Mode, leave the password blank.
Printer:
Open “Assign” and confirm that the print queue(s) you have set is dis-
played. If it is not displayed, click “Add” button and select the PrintQueue
from the list to connect it. If PrintQueue is not displayed in the list,
PrintQueue is created in a different context.
Open “User Environment Setup”, and confirm that “Printer Type” is set to
“Other/Unknown”. The default of “Printer Type” is “Parallel”, and this must
be set to “Other/Unknown”.
3.2.4.1.2 Setting up the remote printer using PCONSOLE (except
NetWare 5)
In order to use this network card in the remote printer mode, you must set
