3. NETWORK SETUP FOR EACH OPERATING SYSTEM
23
3.2.5.2 Setting up the print environment to the Bindery environment
To set the print environment in the NetWare 4.x and 5 Bindery environment,
you need to create a print environment in the Bindery Context.
In the client PC to which NetWare Client 32 has been installed, log in to
the Bindery Context from the admin account (or an account to which an
administrator privilege is given), by specifying the Bindery when you are
logging in.
To log in, you need to log in to the NDS server. Select NDS server in the
NetWare Client32 Log-In Window, and log in without checking the Bind-
ery Connection check box.
After logging in from the admin account (or an account to which an admin-
istrator privilege is given), set the print queue, the print server and the
printer for the Bindery Context with the PCONSOLE(except NetWare 5)
or the NetWare Administrator.
For how to use the PCONSOLE and NetWare Administrator, please refer
to the subsection 3.2.4.1.1, “Setting up the remote printer using the
NetWare administrator utility,” and the subsection 3.2.4.1.2, “Setting up
the remote printer using PCONSOLE (except NetWare 5)”.
For the details of the NetWare Bindery Service, please refer to the
Reference Manual of Novell NetWare.
3.2.5.3 About the message display in Remote Printer Mode
This network card temporarily stops receiving next queue(s) while receiv-
ing a job in the NetWare Remote Printer Mode, according to the Specifi-
cation. At this, NetWare server side handles this as temporary discon-
nection and a message to that effect is sent to the Client side. Once the
network card completes receiving of the current job, however, the con-
nection with the next queue is made, and receive process starts normally.
It is possible to change the display interval of the message from NetWare
server and user(s) for whom the message is displayed. You may change
the settings as you see fit.