3. NETWORK SETUP FOR EACH OPERATING SYSTEM
22
Type the following in the system console of the NetWare server:
SET BINDERY CONTEXT = DV2.DESIGN.COMPANY[RET]
You can also set the Bindery Context by directly editing the
AUTOEXEC.NCF file and adding the above SET statement.
With this setting, DV1 or other departments can access the resources of
DV2’s, using the Bindery Service.
O=Organization
OU=Department
Root
DV2PSVR
DV2PQUE
(O)=COMPANY
(OU)=MARKET
(OU)=FACTORY
(OU)=DESIGN
(OU)=DV2
(OU)=DV1
Bindery set up
3.2.5
Setting in NetWare 4.x and 5 Bindery environment
To use the Bindery Service, set the Bindery context in the NetWare4.x
and 5 environment and set the print server and print queue there.
3.2.5.1 Setting up Bindery Context
To use the Bindery Service, you must set the Bindery Context.
For setting the Bindery Context, you use the set command in the system
console of the NetWare server.
This subsection describes how to do this, using an example in the net-
work which is the NDS environment, except for DV2.
In the explanations, [RET] means to press the Return key.