3. NETWORK SETUP FOR EACH OPERATING SYSTEM
36
3.
Connecting a printer
1
To enable the “Print Manager”, check the “Use Print Manager”
check box in “Printers” of the “Control Panel”.
2
Double-click the “Print Manager” icon from the “Main” group to
open.
3
Select this printer from the printer list and open “Connect Net-
work Printer...” from the “Printers” menu.
4
Select a local port to assign to “Device Name:” on the “Connect
Network Printer” screen.
5
From the “Show Shared Printers on:” list, select the PCs which
share printers and have the shared printers displayed in “Shared
Printers on:”. Select the printer you wish to use from there and
click the “OK” button.
3.3.4
Setting Macintosh
Caution: This network card does not support LocalTalk.
1.
Installing the printer driver
1
Install the PostScript printer driver with the Installer which comes
with the OKIPAGE 12i.
2.
Printer setup
1
Connect the printer to the EtherTalk cable with NETWORK=
ENABLE and EtherTalk =ENABLE, and turn on the power to the
printer.
2
Open the Selector from the Apple menu (Apple icon) of the menu
bar.
If Zone is set in EtherTalk, select the zone to which the printer has
been connected.
3
When you select the PostScript printer driver from the Selector,
network printers connected to the EtherTalk are displayed.
4
Select OkiPage 12i, and click the “Set Up” button.
