3. NETWORK SETUP FOR EACH OPERATING SYSTEM
14
1.
Setting from Client using Windows95/98 MICROSOFT NetWare Client
Service
1
Log in to the NetWare file server from supervisor account.
2
Start PCONSOLE from the NetWare file server volume at MS-
DOS Prompt.
3
Open “Print Server Information ”from “Available Options” window.
4
Select the print server for which you are changing the notification
settings from “Print Servers” window and press Return key.
5
Select “Print Server Configuration” from “Print Server Informa-
tion” window and press Return key.
6
Select “Notify List for Printer” from “Print Server Configuration
Menu” window and press Return key.
7
Select the printer name for which you are changing the notifica-
tion settings from “Defined printers” window and press Return
key. Notification message is displayed to users displayed in the
window opened here. If no user name is displayed here, no noti-
fication is issued. To confirm or change the notification interval,
please proceed to
8
.
8
The settings of the notification interval are displayed in “First” and
“Next” columns of the user list opened in
7
above. “First” shows
the time to issue the first notice and “Next” shows the issuance
interval from one notice to the next notice. The time is expressed
in seconds.
9
To change the notification interval, select target user(s) from the
user list opened in
7
above and press Return key. Change “First”
and “Next” to desired times on “Notify Interval” window, press
ESC key, select “Yes” on “Save changes” window and press Re-
turn key.
0
To delete the user(s) to be notified, select the target user(s) from
the user list opened in
7
above and press Delete key. Select
“Yes” on “Delete Object From Notify List” and press Return key.
A
To add a user to be notified, press Insert key with the user list
open state in
7
above. Select user(s) or a group you wish to add
from “Notify Candidate” window and press Return key. Then
“Notify Intervals” window is displayed. Enter time of your choice
in “First” and “Next” and press ESC key. Select “Yes” on “Save
changes” window and press Return key.
