Oberheim MC 2000, Руководство по эксплуатации

Страница: 53 / 80

MC 2000
Expandable MIDI Master Controller
127
The first field in the display (" TABLES N ") identifies the number and name of the table
selected. Once the field has been selected with [F1] or with the cursor keys and [ENTER],
the Data Entry devices can be used to set the desired table, and the name assigned to it
will appear in the bottom right-hand corner of the display.
The " PRG N. " (PROGRAM CHANGE NUMBER) field, located below the "TABLE N." field,
can be selected with [F4] or using the cursor location devices in the normal way to scroll
through the various Program Changes in the table using the Encoder. The name
associated to each Program Change number appears in the top right-hand corner of the
display and can be modified in the dedicated page, accessed by pressing [F6]. As soon as
the "PRG N." field is selected, the word "
change " appears alongside [F6] to indicate that
the name displayed above it can be changed. The video page which will appear when [F6]
is pressed is as follows:
where the name assignment procedures are the usual procedures explained in section 4.
Now if you wish to save all modifications press the [WRITE] key and the following video
page will appear:
The procedure for memorization and for assigning a name to the table is identical to that
explained in section 4 of this manual.