Oberheim MC 2000, Руководство по эксплуатации, Страница: 13 / 80

MC 2000
Expandable MIDI Master Controller
87
N.B.
If the user decides not to run the update function, the system might not work
correctly. Specifically, the ports for communication with the internal sound generation
board might not be enabled, or there might be errors in association to the Control and
Program Change values. Users are therefore strongly recommended to run this function
whenever the system prompts it.
Immediately afterwards, the display switches to the Program Mode, showing the name and
number of the patch selected automatically on the basis of the setting made by the user.
In the other mode (SILENT), the display does not show the messages relating to the
batteries and the sound board, which will only appear if they have top priority (e.g. back-up
battery flat).
N.B.
The lifetime of the lithium battery installed in the MC 2000 is estimated at 4 years.
However, in critical operating conditions (e.g. high operating temperatures) their life may
be significantly reduced. You are urged to save the memory by means of the MIDI Bulk
Dump as soon as the instrument signals that the memory is at risk ("battery low").
2.2. SETTING THE SWITCH-ON MODE
•
Press the UTILITY key on the right of the front panel (MODE section).
At this point the display will show the 6 sections of the UTILITY operating mode.
•
Select " TOOLS " using function key [F6] or using the selection device (pressing the
cursor keys or turning the encoder until the word TOOLS on the display is highlighted
and confirming with ENTER). The display will show the following: